Rope Washing Range Continuous Washing Machine 100m / min

Multi Chambers Fully Automatic Rope Washing Range

Special technical character for YONGXIN Rope-type Washing machine

1.Auto control between washing chamber unit:

The rope washes between the unit and the unit with a cloth tension detection device to solve the problem of the unsynchronization between the unit and the unit. It is not necessary to manually stop the unit or manually intervene. It is entirely due to the speed of the individual units. Solve the problem that workers can save time and effort by operating, and ensure the smooth operation of the machine and improve the safety of workers' operations.

2.Automatic inside the cell in the chamber:

Each side of each cell in the box is provided with a braking structure, and each cell is provided with a detection mechanism at the front side of the guide ring. Once the detection mechanism has a phenomenon of blunting in a cell, it can The trigger signal immediately gives the brake mechanism an accurate signal. The detection device in the cell transmits a signal to the brake unit of the next cell. After the brake element of the latter cell receives the signal, the device brakes the fabric in the cell, and the fabric in the current cell reaches a certain value. After the amount of cloth is accommodated, the brake unit of the latter cell releases the fabric, the entire unit tank resumes normal operation, and it can self-regulate the synchronization state of the fabric in each unit tank and the amount of cloth stacked in the tank, so that each The fabric between each cell in the unit cell is guaranteed to be within a certain range of capacity, and the worker does not need to constantly monitor the uniformity of the cloth between each cell in each unit cell. This structure takes the place of the conventional washing machine. Manually pulling the cloth to adjust the uniformity of the cloth inside the box not only saves labor and improves the production efficiency, but also enables the equipment to be updated from the open operation to a closed operation, ensuring the safety of the workers during operation.

3.Emergency stop device

Effectively prevent personal injury and corrosive damage from chemicals.

4.Automatic uniformity detecting device

Highly automation,Responsiveness and rapid execution When a detection mechanism is triggered in one of chambers, the detection mechanism will send out a corresponding execution signal, so that after the actuator completes a series of adjustment actions, the entire unit runs as usual and will not stop during machine running.

5.The reflow has 3 water levels , which can be adjusted according to the customer's configuration, increasing or decreasing the water consumption. At the same time, the water level in the chamber can be lowered or raised according to the fabric’s GSM.

6.Anti-bubble hole and knotting detection device

This structure is intended for the case of thin fabrics whenever it tends to float or sink in the pile of fabrics causing the flip knot problem. The corresponding actions will be completed by detecting a series of instructions given by the structure, thereby avoiding the phenomenon of stretching, breaking, etc. caused by the fabric.

7.Efficient and energy saving

According to the measured data, in the production of rayon washing process for 24 hours, the output is 80,000 meters , costing 150 tons of water.

Electrical control system

PLC automatic control, communication can be connected to ERP system, data visualization, mechanical speed can reach 120m/min.

The capacity of the immersion chamber can be set, the meters through by with when machine starts and stops can be displayed in real time.

Alarm helps to find quickly the point of failure and displaying the events

8.Compared with the conventional dyeing machine: the advantage is that it saves labor, saves water, and saves costs. It can avoid the phenomenon that the chamber difference may occur in different batches, and it mostly helps save people. The amount of water used is also greatly reduced and will not increase costs due to frequent water changes.

9.Compared with the full flat width machine: the advantages are the shrinkage rate requirement, the hand feeling requirement, the hair effect requirement have reached the standard of using by dyeing machine, at the same time, the problem of insufficient flat stacking time can be solved, this machine is a fully soft shape rope in the production process. The flat-width machine is easy to control the tension but will lead to happen fabric broken.